Skip to content
Get In Touch

Landfill Cell Lining – Geosynthetic Clay Liner/Multi-Layer Lining System

whitby landfill - manok

Industry

Solid Waste Management

Challenge:

The project faced a delayed start and colder-than-expected weather conditions, which posed logistical and installation challenges.

Achievement:

Despite these setbacks, Titan successfully supplied and installed a full geosynthetic lining system—including GCL, 40mil DST HDPE geomembrane, and two cushion layers of geotextile—and completed the landfill cell project in Whitby, ON on time and under budget.

Product Used:

Nonwoven Geotextile, Woven Geotextile, HDPE Liners

titanenviro.com/landfill-cell-lining-whitby-on-2/

Location: Whitby, ON

Project Type: Product Supply & Installation

Product Used: Geosynthetic Clay Liner (GCL), 40mil DST HDPE Geomembrane, Woven & Nonwoven Geotextile

Challenge

A new landfill was being developed for the disposal of automotive shredder waste, which is where obsolete automobiles are shredded. Metal is removed to be recycled, and any remaining components, such as plastics, fibers, and glass, are disposed of at this dump. The landfill cell needed to be lined for environmental requirements to prevent soil contamination.


The Titan Solution

Titan supplied and installed geosynthetic clay liner (GCL), as well as 40mil DST HDPE geomembrane liner. On top of that, two separation cushion layers of, 8oz nonwoven geotextile and W315 woven geotextile, were also installed.

 HDPE geomembrane liners are the industry’s top choice for lining projects due to their superior strength, solvent resistance, UV durability, and cost-effective performance—even in high-temperature applications.
 

Achievement

Despite that the start of construction was slightly delayed, resulting in colder conditions, our small crew was able to complete the project on time and under budget.

 

Have a similar project in mind?

Let's Talk